Introduction; Service Location - GRAUPNER mz-10c Manual

Introduction

Service Location

4 / 33
Thank you for purchasing the Graupner mz-10c Multirotor Radio. The mz-
10c has been specially designed to make all of your copter flying easy and
fun. Setting up a new copter should not take more than 15 minutes before
you can fly.
The mz-10C will only work with Graupner Multirotor Flight Controllers such
as the GR-18C or the GR-10C.
Each multirotor function such as Attitude/Rate mode, Flip mode and
Throttle hold have been pre-set on the radio. There is no need to program
anything to benefit from the functions of your flight controller.
Depending on your configuration you may need to bind the radio to the
flight controller.
The mz-10C is compatible with all of Graupner Alpha multirotor products
like the Alpha 250, Hornet 250, Alpha 110 and many others and will require
a simple bind to fly any of these models.
One radio can fly all of these copters and you can expand your copter fleet
by simply installing your own the GR-18C flight controller on any copter
such as the Versacopter and go fly!
No programming no fuss no hassle It's that easy!
Note
This manual is part of the product. It contains important information
concerning operation and handling. Keep these instructions for future
reference.
Graupner USA Service
3941 Park Dr., Suite 20-571
El Dorado Hills, CA 95762
United States
Phone: (855) 572-4746
Email: service@graupnerusa.com
www.graupnerusa.com