Packaging Specifications For Air Transportation - Siemens SIMOTICS L-1FN3 Configuration Manual

Linear motors peak and continuous load motors
Hide thumbs Also See for SIMOTICS L-1FN3:
Table of Contents

Advertisement

Table 7- 2
Biological ambient conditions
Transportation:
Table 7- 3
Chemical ambient conditions
Transportation:
Table 7- 4
Mechanically active ambient conditions
Transportation:
Table 7- 5
Mechanical ambient conditions
Transportation:
7.1.2

Packaging specifications for air transportation

When transporting products containing permanent magnets by air, the maximum permissible
magnetic field strengths specified by the appropriate IATA Packing Instruction must not be
exceeded. Special measures may be required so that these products can be shipped. Above
a certain magnetic field strength, shipping requires that you notify the relevant authorities
and appropriately label the products.
Note
The magnetic field strengths listed in the following always refer to values for the DC
magnetic field specified in the IATA packaging instruction 953. If the values change, then we
will take this into account in the next edition.
Products whose highest field strength exceeds 0.418 A/m, as determined at a distance of
4.6 m from the product, require shipping authorization. This product will only be shipped with
previous authorization from the responsible national body of the country from where the
product is being shipped (country of origin) and the country where the airfreight company is
based. Special measures need to be taken to enable the product to be shipped.
When shipping products whose highest field strength is equal to or greater than 0.418 A/m,
as determined at a distance of 2.1 m from the product, you have a duty to notify the relevant
authorities and appropriately label the product.
When shipping products whose highest field strength is less than 0.418 A/m, as determined
at a distance of 2.1 m from the product, you do not have to notify the relevant authorities and
you do not have to label the product.
1FN3 linear motors
Configuration Manual, 10/2018, 6SN1197-0AB86-0BP2
Class 2B1
Class 2C1
Class 2S2
Class 2M2
Preparation for use
7.1 Transporting
475

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents