Table of Contents
Advertisement
Table 7- 2
Biological ambient conditions
Transportation:
Table 7- 3
Chemical ambient conditions
Transportation:
Table 7- 4
Mechanically active ambient conditions
Transportation:
Table 7- 5
Mechanical ambient conditions
Transportation:
7.1.2
Packaging specifications for air transportation
When transporting products containing permanent magnets by air, the maximum
permissible magnetic field strengths specified by the appropriate IATA Packing
Instruction must not be exceeded. Special measures may be required so that these
products can be shipped. Above a certain magnetic field strength, shipping requires that
you notify the relevant authorities and appropriately label the products.
Note
The magnetic field strengths listed in the following always refer to values for the DC
magnetic field specified in IATA packaging instruction 953. If the values change, we will
take this into account in the next edition.
Products whose highest field strength exceeds 0.418 A/m, as determined at a distance
of 4.6 m from the product, require shipping authorization. This product will only be
shipped with previous authorization from the responsible national body of the country
from where the product is being shipped (country of origin) and the country where the
airfreight company is based. Special measures need to be taken to enable the product to
be shipped.
When shipping products whose highest field strength is equal to or greater than
0.418 A/m, as determined at a distance of 2.1 m from the product, you have a duty to
notify the relevant authorities and appropriately label the product.
When shipping products whose highest field strength is less than 0.418 A/m, as
determined at a distance of 2.1 m from the product, you do not have to notify the
relevant authorities and you do not have to label the product.
1FW68 radial segment motors
Configuration Manual, 08/2021, A5E51132930B AA
Class 2B1
Class 2C1
Class 2S2
Class 2M2
Preparation for use
7.1 Transporting
141
Advertisement
Table of Contents
