Installing The Wash Station And Connecting The Tubing - Agilent Technologies AssayMAP 96AM Maintenance Manual

Installing the wash station and connecting the tubing

Installing the 96AM Wash Station
AssayMAP 96AM Wash Station Maintenance Guide
Before you start
WARNING
To prevent potential injury, turn off the Bravo Platform before you install or
remove any accessory.
The following procedure assumes that the platepad with brackets is already
installed at deck location 1.
Figure 96AM Wash Station installed at deck location 1
To install the wash station:
1
At deck location 1, ensure that the outer side bracket (next to the
crosshairs) is removed from the platepad.
Figure Bracket next to platepad crosshairs
1 96AM Wash Station Maintenance Guide
Installing the wash station and connecting the tubing
13