Fermax CITY FINGERPRINT READER User& Installer's Manual page 6

FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT
FINGERPRINT FINGERPRINT
Initial action Data
b)
Enter master
Registered
f i n g e r p r i n t /
card
Led On
The system is programmed with the Master fingerprint/card and a remote infrared keypad.
Led
1 2 3
The led lights up every time any of the keypad's keys are pressed.
4 5 6
Indications:
7 8 9 +
x -
0 Led Off. Does not transmit any signal.
Red Led On. Correct Transmission.
REMOTE UNIT
FOR ACCES CONTROL
Key Functions
This function can be used for:
a) Data Entry
b) Menu Selection
Confirmation Key
x
Cancel Key. Exit Programming Mode
Scroll Keys in Menus
1 2 8 9
.....
Data Entry Keys
SUMMARY steps to enter/exit programming mode
Any time you wish to enter or exit Programming Mode you must follow these steps:
- to Enter Mode: enter master fingerprint/card.
- to Exit Mode: press the cancel button (X). The reader will automatically exit
programming mode after 60 seconds of inactivity.
Pag 6
resulting action
Standby Mode
Enter
- Enter the master
Programming
Mode
Led Off
Display/leds
fingerprint/card.
Enter Programming Mode
Led Flashing
Sound
A d d
1 beep