Fermax CITY FINGERPRINT READER User& Installer's Manual page 10

FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT
FINGERPRINT FINGERPRINT
c) Add user Mode 1 Fingerprint + Proximity or Code
Standby Mode
3. d1.1 is shown. Enter the user fingerprint you wish to register in the system.
d 1. 1
1 beep
4. d1.2 is shown. Re-enter the user fingerprint you wish to register to confirm the fingerprint.
d 1. 2
1 beep
5. Relay is shown. Using the scroll keys the following sequence will appear relay, both, Au.... There are three
options the action of which associated with this user fingerprint is:
- Relay: to open the door
- both: to open the door and activate the auxiliary exit simultaneously
- Au: to activate the auxiliary exit
Select the required option and confirm using the OK key.
Select an option
1 2 3
4 5 6
7 8 9 +
x 0 -
REMOTE UNIT
FOR ACCES CONTROL
6. d2 is shown. Cancel with "X". The reader is ready (LEDs flashing) for a card or code to be entered (if the
reader has a keypad).
7. Bring close the card that you wish to register. If it has registered correctly d1.1 is shown.
Pag 10
1. Enter the master fingerprint
A d d
Enter Programming Mode
1 beep
1 beep
0 0 0 1
r e L a
E o t h
A u
1 2
4 5
d 2
1 beep
7 8
x
0
REMOTE UNIT
FOR ACCES CONTROL
P r o E
1 beep
2. Confirm the Add option with the
1 bip
0 y
1 beep
1 beep
Accept
1 2 3
4 5 6
7 8 9 +
x
0 -
REMOTE UNIT
FOR ACCES CONTROL
3
x
6
9 +
-
1 beep
validation key
1 2 3
4 5 6
7 8 9 +
x -
0
REMOTE UNIT
FOR ACCES CONTROL
d 1. 1