Fermax CITY FINGERPRINT READER User& Installer's Manual page 11

FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT
FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT
7b. If it was a keypad code (if the reader has a keypad).
4 digits
6 digits
8. d1.1 re-appears, allowing us to continue registering users. Repeat the aforementioned steps to register
new users in mode 1 fingerprint + keypad or code.
NOTE:
- The choice of number of digits (4 or 6) is chosen using the option:
C o d e
NOTES:
- The same fingerprint cannot be entered twice on different registers (user number), therefore if it is
already registered on the system it cannot be re-registered.
- The master fingerprint cannot be the user fingerprint either.
- The same proximity card cannot be entered twice on different registers (user number), therefore
if it is already registered on the system it cannot be re-registered.
d) Add user Mode 2 Fingerprints + Proximity or Code
Allows two fingerprints be registered for one user. The user can chose between the
following second fingerprint functions:
- Allows the use of the second fingerprint where there is a problem with the first one
(short-circuit, fire damage .....etc).
For this functionality choose the corresponding option: relay (to open the door).
- Intimidation Alarm. Using the second fingerprint instead of the first one the lock-
release will activate as will the alarm output. Where the first fingerprint is used only
the lock-release activates.
For this functionality choose the corresponding option: Au (to activate the auxiliary exit)
Standby Mode
1 2 3
4 5 6
7 8 9
0 B
A
1 beep
4 or 6 digit code + B.
( + )
1 1 2 2 3 3
4 4
(
1 2 3 3
4
Accept
1 2 3
4 5 6
7 8 9 +
x -
0
REMOTE UNIT
FOR ACCES CONTROL
1. Enter the master fingerprint
A d d
Enter Programming Mode
1 beep
C o d e
The code has already
been registered
For example:
B B
+ )
4 B
d 1. 1
Code
0 0 0 6
2. Confirm the Add option with the
1 beep
1 2 3
4 5 6
Select an option:
7 8 9 +
x 0 -
0004 or 0006
REMOTE UNIT
FOR ACCES CONTROL
validation key
1 2 3
4 5 6
7 8 9 +
x 0 -
REMOTE UNIT
FOR ACCES CONTROL
Pag 11