Operating Status; Not Set-Up; Standby; Programming - Fermax CITY FINGERPRINT READER User& Installer's Manual

FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT
FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT

Operating Status

1. Not Set-Up. Default Status (as set in factory). A master fingerprint/card has not yet been
registered.
2. Standby. Normal mode, waiting for registered users to use fingerprint identification.
Where the user is recognised this will be indicated by way of an acoustic tone, a green
light and the lock-release relay will also be activated.
Standby mode
Initial action
Registered
Enter user card/
fingerprint
Not Registered
Enter master
Registered
fingerprint/card

3. Programming.

In this mode the administrator can configure the system's different operating
parameters.
It is accessed using the administrator's master fingerprint/card.
a) Where a master fingerprint/card has not yet been registered (reader with default values).
b) Master fingerprint/card registered on the reader.
Initial action
a)
Enter master
Not Registered
fingerprint/card
(the reader will be
registered for the first
time with default
factory values)
Resulting
Data
action
Lock-Release
Opening
no action
Enter
Programming
Mode
Resulting action
Data
Register
master
fingerprint/
card
Display/leds
RED
0 0 0 2
indicates the register's
memory position
E r r
indicates an error
A d d
shows first programming
option
Display/leds
Mode Not Set-Up
Once powered up Ini will
appear on the display.
- Enter the master
fingerprint/card.
- Confirm the master
fingerprint/card
Sound
GREEN
beeep
Door Opening
Time Period
1 beep
1 beep
Sound
I n i
1 beep
0 y
1 beep
d 2. 2
0 y
1 beep
Pag 5
1 bip