Commissioning With The Festo Maintenance Tool Software (Cpx-Fmt) - Festo cpx-fb13 Manual

4 Commissioning
4.8

Commissioning with the Festo Maintenance Tool software (CPX-FMT)

The PC software CPX Festo Maintenance Tool (CPX-FMT) can also be used for commission­
ing, parameterisation and extended diagnostics of the CTEL master module. You can find
the current software version in the Internet (è www.festo.com/sp).
Fig. 4.4 shows the list of parameters of a CTEL master module as an example.
Fig. 4.4
Warning
The connected actuators can move unexpectedly!
Modification of the signal statuses and parameters with the FMT can trigger dangerous
movements of the connected actuator technology.
• Make sure that nobody is in the positioning range of the connected actuators and be
very careful with parameterisation or manipulation of signal statuses.
• It is imperative that you observe the instructions on "Force", "Idle mode" and "Fail
safe" in the CPX system description and in the description for the Handheld.
Festo – P.BE-CPX-CTEL-EN – 1411a – English 43