Commissioning With The Operator Unit (Cpx-Mmi) - Festo cpx-fb13 Manual

4 Commissioning
4.7

Commissioning with the operator unit (CPX-MMI)

The operator unit (CPX-MMI) offers convenient or extended functions, which will support you in com­
missioning the CTEL master module.
This section includes an overview of the specific commissioning functions for the CTEL master module:
– General information on representation
(è 4.7.1 Menu commands of the CTEL master module on the operator unit (CPX-MMI))
– Display of signal statuses (è 4.7.2 Observe signal statuses (monitoring))
– Parameterisation (è 4.7.3 Parameterisation with the operator unit (CPX-MMI))
General information on the operator unit (CPX-MMI) and on commissioning the CPX ter­
minal using it can be found in the description (P.BE.CPX-MMI-1-...).
Warning
The connected actuator technology can move unexpectedly!
Modification of the signal statuses and parameters using the operator unit can trigger
dangerous movements of the connected actuator technology.
• Make sure that nobody is in the positioning range of the connected actuators and be
very careful with parameterisation or manipulation of signal statuses.
• Observe the notes on "Force", "Idle mode" and "Fail safe" in the CPX system de­
scription and in the description for the operator unit if the CPX bus node used sup­
ports these parameterisation types.
Festo – P.BE-CPX-CTEL-EN – 1411a – English 39