Installation; General Installation Instructions - Festo cpx-fb13 Manual

Terminal cpx, electrical interface, ctel master module, i-port

Hide thumbs Also See for festo cpx-fb13:

Table of Contents

Installation

3.1

Warning

Uncontrolled movements of the connected actuator technology and loose tubing can

cause injury to persons and/or damage to property.

Before carrying out mounting, installation and maintenance work, switch off the follow

ing:

– compressed air supply

– Operating voltage supply for the electronics/sensors

– Load voltage supply for the outputs/valves

Caution

Electrostatically sensitive devices!

• Do not touch any components.

• Observe the handling specifications for electrostatically sensitive devices.

They will help you avoid damage to the electronics.

Note

• Handle all modules and components carefully.

• Comply with the specified torques.

You can obtain information on mounting the CPX terminal in the CPX system description

(è P.BECPXSYS...).

Festo – P.BE-CPX-CTEL-EN – 1411a – English

Table of Contents