Programming Key Assignments Using Copy; Copying A Call From The Call Waiting Window To A Key; Copying One Key Assignment To Another Key - RTS KP-32 User Instructions

KP-32 User Manual
FUNC RELAY Relay or GPI output.
Auto function assignment only: Tap an additional number to select the desired auto function:
3.
1 Auto listen (listen keys only)
2 Auto follow (listen keys only)
3
4
5 All call (talk level 1 only)
6 DIM (talk level 2 only, for point-to-point key, must enter 00 first)
7 Auto table (listen only, when talk level 1 is an IFB assignment)
Trunked intercoms only: (Skip when assigning auto functions or local key assignments.)
Select an intercom matrix (tap 1, or 2, etc.).
4.
NOTE: Intercom system numbers are the numbers that appear in the "Icm" column in TrunkEdit when you
(Skip when assigning auto functions.) Tap one or more number keys to select the desired port number, party line
5.
number, etc
If the destination is in the local matrix, enter the destination number.
6.
NOTE: If the destination is in a remote matrix, you must always enter exactly 3 digits for a port number, or
Tap PGM.
7.
Tap down on a key to assign talk. Tap up to assign listen.
8.
NOTE:
If a key does not accept an assignment, the destination you are trying to assign may not be scrolling
enabled in AZedit. Or, the key that you are trying to assign may be restricted in AZedit.
Auto functions are always assigned in the local intercom system, even when used with keys assigned to
a remote intercom system. For example, you can program a talk key to talk to a remote party line and
then program the listen key using auto-listen on the local intercom. Pressing the talk key automatically
activates listening for the remote party line.

Programming Key Assignments Using Copy

There are two ways to copy key assignments: 1) you can copy a call from the Call waiting window to a key; or 2) you can copy
one key's assignment to another key.

Copying a Call from the Call waiting Window to a Key

While the caller's name is displayed in the call waiting window, tap the COPY CW key.
1.
Tap the key where you want to copy to. 
2.
The name of the caller should appear in the display above the key.
NOTE: If a key does not accept an assignment, the destination you are trying to assign may not have

Copying One Key Assignment to Another Key

Tap the FUNC key.
1.
Tap the EX COPY key.
2.
Bosch Security Systems, Inc.
select "Names" or "Setup" from the Intercoms menu.
exactly 2 digits for anything else. For example, to assign port 1 you must enter 0 0 1; for party line
1 you must enter 0 1.
scrolling enabled in AZedit. Or, the key that you are trying to assign may be restricted in AZedit.
User Manual
KP9X Series Keypad Programming 31
F.01U.193.253 Rev. 16