™ ADAM , ADAM Talk (Talk) Matrix Intercom System Talk (Talk) Matrix Intercom System 9350-7101-004 V8.2 Rev B 8/00 KP95-0 KEYPANEL VERSION 8.2 WITH EKPD-95 EXPANSION PANEL ™ ™ CS, AND ZEUS INTERCOM SYSTEMS Talk KP95-0 Keypanel Talk EKPD-95 Expansion Panel...
Page 2
The sole obligation of Telex during the warranty period is to provide, without charge, parts and labor necessary to remedy covered defects appearing in products returned prepaid to Telex.
Page 4
This manual describes the operating procedures for the KP95-0 keypanel when used in an ADAM™, ADAM CS or Zeus™ DSP Intercom System. The KP95-0 must be programmed from a PC with the ADAMedit or ZEUSedit intercom configuration software. If you need to change the keypanel setup or access other information about the keypanel setup, you will need to consult with your system administrator.
Page 5
Whenever there is an incoming call, you will hear the caller in your speaker or headset. If there is a talk key assigned to the caller, you can respond by pressing it. However, since the KP95-0 does not have displays for incoming caller identification, the standard procedure is to use the talk keys for outgoing calls only and to use the Incoming Messages key to respond to incoming calls.
Need help?
Do you have a question about the KP95 and is the answer not in the manual?
Questions and answers