About This Manual
The MVME2100 Single Board Computer Programmer's Reference Guide provides the
information you will need to program and customize your MVME2100 Single Board
Computer. It provides specific programming information and data applicable to the board.
As of the printing date of this manual, the MVME2100 is available in the configurations
shown below.
Model
MVME2101-1
MVME2101-3
MVME2112-1
MVME2112-3
Summary of Changes
The following changes were made for the PG2 revision of this manual.
Date
06/2001
Overview of Contents
The following paragraphs briefly describe the contents of each chapter.
MPC
MPC8240
@200MHz
MPC8240
@250MHz
Doc. Rev
V2100A/PG2
A note was added to page
PPCBug's use of Bit 7 for Flash Bank selection.
This section "About this Manual" was also added.
Memory
32MB SDRAM
5 MB Flash Memory
32MB SDRAM
5 MB Flash Memory
64MB SDRAM
9 MB Flash Memory
64MB SDRAM
9 MB Flash Memory
Changes
1-16
Handles
VME Scanbe
IEEE 1101
(Injector/Ejector)
VME Scanbe
IEEE 1101
(Injector/Ejector)
to explain
xiii