Mechanical Setup Of Trailer - Barco B-16 Mobile LED Installation Manual

3.2

Mechanical setup of trailer

What should be done ?
The trailer must be placed on a stable underground. Then the trailer must be uncoupled from the pulling vehicle and water-levelled
in both directions.
How to uncouple
1. Place the trailer on a flat and hard ground (min 2 kg/cm²)
2. Turn down the draw bar support until it reaches the ground.
Use the drill machine with nut driver to lower the support.
3. Trigger the brake system of the trailer.
Image 3-2
Brake system trailer
1 Brake handle
4. Uncouple the trailer from the vehicle hitch.
Trailer setup
1. Release the handles under the trailer and pull out the outriggers (Left side).
Image 3-3
Unlock outriggers
1 Unlock handle
2 Outrigger
2. Place a wooden support under each outrigger (4 sides).
R59770490 B-16 MOBILE LED 07/01/2010
3. Installation
21