Table of Contents
Advertisement
2. Installation requirements
2.1
Mechanical requirements
Support structure
The support structure has to be provided and installed by the customer because they vary from system to system. Although, the
following must be taken into account and must be precisely calculated on individual basis:
1.
Weight tolerances : Ensure that the support structure and the floor on which or the wall against which the support structure
has to be installed, is able to handle the complete weight of the fixed SLite LED display.
2.
Environmental conditions : Humidity, wind, temperatures, rain, etc.
3.
Location : Outdoor, altitude, etc.
4.
Ground stability
5.
Front clearances : For optimal impact ensure that there is sufficient free area in front of the SLite display and respect the
maximum viewing distance.
6.
Local regulations regarding such installations
W
ARNING
the load holding capabilities. If there are doubts on a systems viability, consult Barco for advise on profes-
sional rigging organizations.
Individual basis
Support structures must be assessed on an individual basis. Never construct a wall if there is uncertainty regarding the stability of
an installation or the load holding capabilities. If there are doubts on a system's viability, consult Barco for advise on professional
rigging organizations.
Example of a support structure
Image 2-1
8
:
Never construct an SLite display if there is uncertainty regarding the stability of an installation or
R5976575 FIXED SLITE DISPLAY 08/03/2006
Advertisement
Table of Contents
