Table of Contents
Advertisement
Image 3-8
External battery connection
1
Battery cable
2
External battery connector
About cooling the generator
•
Make sure there are no obstructions at the fresh air intake.
•
Make sure the hot air can leave easily through the grid.
•
Make sure that the exhaust gases can escape easily.
Never run the generator in an inappropriately ventilated room !
With an external power source
Connect an external source (3 conductors + neutral) to the input power distribution connector.
Image 3-9
1
External power connection
Power distribution inside the B-16 Mobile LED
All internal power distribution is done via the distribution panel.
R59770490 B-16 MOBILE LED 07/01/2010
3. Installation
25
Advertisement
Table of Contents
