Ats; Ats Appearance - Huawei UPS5000-E Series User Manual

UPS5000-E-(40 kVA-128 kVA)
User Manual (Integrated UPS 2.0)
Table 2-10 Description of LCD screen ports
No.
1
2
3
4
5
6
7
8
Functions
The monitor display unit (MDU) allows for general UPS operations, parameter setting,
viewing of running status and alarms, and so on.
Specifications
Dimensions (H x W x D): 175 mm x 264 mm x 40 mm

2.3.4 ATS

2.3.4.1 ATS Appearance

Figure 2-24 shows an ABB AC transfer switch (ATS). Be familiar with and configure the ATS
before powering on the system. For details about the ATS, see the ATS instructions delivered
with the product.
Issue 04 (2018-04-20)
Port Name
MUS05A (DB26)
FE
CAN
RS485_1
USB Host
RST
SD
DIP switch
Copyright © Huawei Technologies Co., Ltd.
Description
Connects to the MDU and
monitoring interface card
Network port
Reserved
Reserved

After installing the WiFi
module, connect the WiFi
module to the UPS using the app
on the mobile phone to obtain
the initial startup password.
 Insert the USB flash drive,
import and export the
configuration file, export run
logs, and upgrade software.
Restart switch for the MDU
Reserved
Implements specific functions by
using the DIP switch and specific
buttons; controls the CAN
communication build-out resistor in
a parallel system
2 Overview
33