Huawei UPS5000-E Series User Manual page 168

UPS5000-E-(40 kVA-128 kVA)
User Manual (Integrated UPS 2.0)
The UPS begins to work in normal mode and starts initialization. The LCD displays the
Huawei logo and an initialization progress bar.
Step 2 After the LCD starts properly, perform the following operations:


1.
2.
Set the date and time correctly. Incorrect time display in running and alarm information would
lead to analysis errors during maintenance or repair.
Issue 04 (2018-04-20)
If the UPS is starting for the first time, set the language, date and time, network
parameters, and system parameters on the Settings Wizard screen.
If this is not the first startup, retain the previous settings.
After you perform the settings, the Bypass mode alarm and No battery alarms are displayed on the LCD.
The main buttons on the Settings Wizard screen are described as follows:
 Tap Previous to return to the upper-level screen.
 Tap Next to go to the next screen.
 Tap Cancel to exit the Settings Wizard screen.
Various languages are available, such as Chinese and English. Press Down and Up to
view the language types.
Figure 6-3 Language screen
Tap Next. On the Time screen, select a date format.
Copyright © Huawei Technologies Co., Ltd.
6 Operations
160