Huawei UPS5000-E Series User Manual page 263

UPS5000-E-(40 kVA-128 kVA)
User Manual (Integrated UPS 2.0)
Alar
m
ID
(Ala
rm
ID-
Cau
se
ID)
0199
0200
0370
0203
0211
0212
0213
0216
Issue 04 (2018-04-20)
Alarm Sever System Action
Name ity
High
Mains Warni None.
underc ng
urrent
Branch Warni None.
underc ng
urrent
Branch Critic None.
switch al
open
Branch Warni None.
switch ng
abnorm
al
ATS Minor None.
non-aut
o mode
Main Critic None.
temper al
ature
abnorm
al
Branch Critic None.
temper al
ature
abnorm
al
ATS Critic None.
Copyright © Huawei Technologies Co., Ltd.
Cause Solution
overcurrent.
Phase L1, L2, or Check phase L1,
L3 experienced L2, or L3 loads.
overcurrent.
A branch Check the branch
experienced loads.
overcurrent.
A branch switch Check the status of
is OFF. the branch switch.
A branch is not Check the branch
connected to loads.
loads.
The ATS Set the ATS
switchover mode switchover mode to
is set to manual automatic mode.
mode.
 
Overload for a
long time
 
Unreliable
copper bar
connection
 Overload for a 
long time

Unreliable
copper bar 
connection
 Fire 
One ATS power Check whether two
C Alarm List
Check that there
is no overload.
Power off the
UPS and check
whether the
copper bar is
reliably
connected.
Check whether
there is a branch
fire.
Check that there
is no overload.
Power off the
UPS and check
whether the
copper bar is
reliably
connected.
255