Page EN-22
Installation, fitting, connection
Installation, fitting, connection
Choose a suitable location
CAUTION!
Electric shock / fi re hazard!
Faulty electrical installation may lead
to electric shocks and/or fi re.
Do not use a multi-socket extension
■
cable, multi-socket plug, travel adapt-
er or similar.
We recommend using a pulse-sensi-
■
tive residual current device (RCD).
The planned location must fulfil the following
prerequisites:
– The location must be a dry and frost-safe
room with a firm ground.
– The dishwasher must be positioned be-
neath a full work surface which is joined
together with the cupboards adjacent to the
dishwasher.
– In order to install the connection pipes, the
dishwasher must be positioned near to a
washing/dishwashing basin.
– The measurements of the recess must at
least correspond to the details in the follow-
ing diagram.
90°
820 mm
580 mm
450mm
Connecting the outlet hose
Potential malfunction!
Waste water must be able to run away
freely at all times.
Ensure that the waste pipe has a di-
■
ameter of 40 mm.
Ensure that there are no kinks or dam-
■
age to the outlet hose.
Make sure that the end of the hose is
■
not submerged in the pumped water.
Do not extend the outlet hose or re-
■
place with another drainage pipe.
90°
The outlet hose (25) can be connected in two
ways:
– Variant "A":
Connection to a floor drain.
– Variant "B":
80 mm
Direct connection to the odour seal (si-
phon) of your washing/dishwashing
100 mm
basin. The outlet hose must be a max-
imum of 1000 mm above the floor.
Technical measures must be taken for con-
nection. For this reason, only plumbing ex-
perts or members of our service team may
connect the outlet hose (see page EN-32).
NOTICE
B
A
Ø 40 mm