Installation, Fitting, Connection; Choose A Suitable Location; Connecting The Outlet Hose - Hanseatic HGU4582D97710DI User Manual

Page EN-28

Installation, fitting, connection

Installation, fitting, connection

Choose a suitable location

CAUTION!
Electric shock / fi re hazard!
Faulty electrical installation may lead
to electric shocks and/or fi re.
Do not use a multi-socket extension
■
cable, multi-socket plug, travel adapt-
er or similar.
We recommend using a pulse-sensi-
■
tive residual current device (RCD).
The planned location must fulfil the following
prerequisites:
– The location must be a dry and frost-safe
room with a firm ground.
– The dishwasher must be positioned be-
neath a full work surface which is joined
together with the cupboards adjacent to the
dishwasher.
– In order to install the connection pipes,
the dishwasher must be positioned near to
a washing/dishwashing basin.
– The measurements of the recess must at
least correspond to the details in the follow-
ing diagram.
90°
820 mm
580 mm
450mm

Connecting the outlet hose

Potential malfunction!
Waste water must be able to run away
freely at all times.
Ensure that the waste pipe has a
■
diameter of 40 mm.
Ensure that there are no kinks or dam-
■
age to the outlet hose.
Make sure that the end of the hose is
■
not submerged in the pumped water.
Do not extend the outlet hose or
■
replace with another drainage pipe.
90°
The outlet hose (25) can be connected in two
ways:
– Option A:
Connection to a floor drain.
– Option B:
80 mm
Direct connection to the odour seal (siphon)
of your washing/dishwashing basin. The
100 mm
outlet hose must be a maximum of 1000 mm
above the floor. Technical measures must
be taken for connection. For this reason,
only plumbing experts or members of our
service team may connect the outlet hose
(see page EN-38).
NOTICE
B
A
Ø 40 mm