Installation, Fitting, Connection; Choosing A Suitable Location; Having The Outlet Hose Connected - Hanseatic HGU4582D10J7710EI User Manual

Installation, fitting, connection

Choosing a suitable location

CAUTION!
Electric shock / fi re hazard!
Faulty electrical installation may lead
to electric shocks and/or fi re.
Do not use a multi-socket extension
■
cable, multi-socket plug, travel adapt-
er or similar.
We recommend using a pulse-sensi-
■
tive residual current device (RCD).
The planned location must fulfil the following
prerequisites:
– The location must be a dry and frost-safe
room with a firm ground.
– The dishwasher must be positioned be-
neath a full work surface which is joined
together with the cupboards adjacent to the
dishwasher.
– In order to install the connection pipes,
the dishwasher must be positioned near to
a washing/dishwashing basin.
– The measurements of the recess must at
least correspond to the details in the follow-
ing diagram.
90° 90 °
820 mm
820mm
580 mm
580mm
Inlet/outlet area
and electrical
connection.
450 mm
600 mm
Installation, fitting, connection
Having the outlet hose
connected
Potential malfunction!
Waste water must be able to run away
freely at all times.
Ensure that the waste pipe has a
■
diameter of 40 mm.
Ensure that there are no kinks or dam-
■
age to the outlet hose.
Make sure that the end of the hose is
■
not submerged in the pumped water.
Do not extend the outlet hose or
■
replace with another drainage pipe.
90° 90 °
80 mm
80
100 mm
100
NOTICE
Page EN-29