Page EN-28
Installation, fitting and connection
Installation, fitting and connection
Choosing a suitable location
CAUTION!
Risk of injury!
The appliance is heavy and bulky.
Improper handling of the appliance
may lead to injuries.
Seek the help of another person during
■
transport, installation and assembly.
If a trolley is used to transport the ap-
■
pliance, the appliance must be moved
as shown on the packaging.
Only lift the appliance as shown on
■
the packaging.
Remove all obstacles on the transport
■
route and from the installation loca-
tion. Close doors and clear away ob-
jects lying on the fl oor.
Recess dimensions
90°
820 mm
580 mm
Inlet/outlet area
and electrical
connection.
600 mm
The planned location must fulfil the following
prerequisites:
– The location must be a dry and frost-safe
room with a firm ground.
– The dishwasher must be positioned be-
neath a full work surface which is joined
together with the cupboards adjacent to the
dishwasher.
– In order to install the connection pipes,
the dishwasher must be positioned near to
a washing/dishwashing basin.
– The measurements of the recess must at
least correspond to the details in the follow-
ing diagram.
90°
80 mm
100 mm