Emerson Rosemount 6888C Quick Start Manual page 19

October 2019
• JP2: Pins 2-3
• JP5
— Pins 1-2 internal power
— Pins 2-3 external power
• JP7
— Pins 1-2 internal power
— Pins 2-3 external power
• JP8
— Pins 1-2 internal power
— Pins 2-3 external power
SW4 switch settings
• Position 1: Off
• Postion 2: Off
• Position 3: Off
• Position 4: Off
NOTICE
A. Except for JP5, JP7, and JP8 on IO board, jumper and switch settings are
factory set and are shown for reference only.
B. IO board 4-20 mA/HART loop power settings
JP5
•
•
JP7/JP8
•
•
Quick Start Guide
Pins 1-2 internal power Rosemount 6888 Xi to Rosemount 6888
Transmitter.
Pins 2-3 external power Rosemount 6888 Xi to Rosemount 6888
Transmitter (requires 2,500 resistor across J4, PR+ to PR-).
Pins 1-2 internal power Rosemount 6888Xi to DCS.
Pins 2-3 external power Rosemount 6888Xi to DCS.
Quick Start Guide
19