Load paper by following the procedure below. In this section, LTR custom size paper is used as an example.
Confirm the paper types that can be loaded.
To use a paper type not registered in the machine, register it in advance.
Load paper in the paper drawer.
Specify the loaded paper size and type for the paper drawer.
This section describes available paper sources. Paper that can be loaded differs, depending on the paper sources. The
following description includes the optional products as well as the standard paper deck/paper drawers. The optional
products are indicated with
"Appendix" > "Hardware Specifications" > "Available Paper" in the
"Registering Paper Types to the Machine," on p� 16
"Loading Paper into the Paper Deck/Paper Drawer," on p� 18
"Registering Custom Paper Types," on p� 20
POD Deck Lite
Paper Deck Unit-E
Document Insertion Unit-N
Document Insertion /
Stack Bypass Alignment Tray-D
Long Sheet Tray-B