Download  Print this page

Advertisement

Fixing Unit
When removing jammed paper or when
inspecting the inside of the machine, do not
expose yourself to the heat emitted from the
fixing unit and its surroundings for a prolonged
period of time. Doing so may result in low
temperature burns, even though you did not
touch the fixing unit and its surroundings
directly.
IMPORTANT
Follow the caution instructions on labels and
the like found on this machine.
Do not subject the machine to strong shocks
or vibration.
Do not forcibly open and close doors, covers,
and other parts. Doing so may result in
damage to the machine.
Do not turn the main power switch OFF or
open the covers while the machine is in
operation. This may result in paper jams.
Use a modular cable that is shorter than 3
meters.
Use a USB cable that is shorter than 3 meters.
Safety-Related Symbols
Power switch: "ON" position
Power switch: "OFF" position
Power switch: "STAND-BY" position
Push-push switch
"ON"
Protective earthing terminal
Dangerous voltage inside. Do not open
covers other than instructed.
CAUTION: Hot surface. Do not touch.
Class II equipment
Moving parts: Keep body parts away from
moving parts
CAUTION: An electrical shock may occur.
Remove all the power plugs from the power
outlet.
There are sharp edges. Keep body parts
away from sharp edges.
[NOTE]
Some of symbols shown above may not be
affixed depending on the product.
Maintenance and Inspections
Clean this machine periodically. If dust
accumulates, the machine may not operate
properly. When cleaning, be sure to observe the
following. If a problem occurs during operation,
see "Troubleshooting" in the User's Guide.
36
WARNING
Before cleaning, turn OFF the power and
unplug the power plug from the AC power
outlet. Failure to do so may result in a fire or
electrical shock.
Unplug the power plug periodically and clean
with a dry cloth to remove dust and grime.
Accumulated dust may absorb humidity in
the air and may result in a fire if it comes into
contact with electricity.
Use a damp, well wrung-out cloth to clean
the machine. Dampen cleaning cloths with
water only. Do not use alcohol, benzine, paint
thinner, or other flammable substances. Do
not use tissue paper or paper towels. If these
substances come into contact with electrical
parts inside the machine, they may generate
static electricity or result in a fire or electrical
shock.
Check the power cord and plug periodically
for damage. Check the machine for rust,
dents, scratches, cracks, or excessive heat
generation. Use of poorly-maintained
equipment may result in a fire or electrical
shock.
CAUTION
The inside of the machine has high-
temperature and high-voltage components.
Touching these components may result in
burns. Do not touch any part of the machine
that is not indicated in the manual.
When loading paper or removing jammed
paper, be careful not to cut your hands with
the edges of the paper.
Consumables
WARNING
Do not throw toner cartridges or waste toner
containers into open flame, or do not store
them or printing/copy paper in a place
exposed to open flame. This may cause
them to ignite, resulting in burns or fire.
If you accidentally spill or scatter toner,
"OFF"
carefully gather the toner particles together
or wipe them up with a soft, damp cloth in a
way that prevents inhalation. Never use a
vacuum cleaner that does not have
safeguards against dust explosions to clean
up spilled toner. Doing so may cause a
malfunction in the vacuum cleaner, or result
in a dust explosion due to static discharge.
CAUTION
Keep toner and other consumables out of
the reach of small children. If these items are
ingested, consult a physician immediately.
If toner touches your clothes or skin, wash it
away with water immediately. Do not use
warm water, as this may cause toner to fix,
resulting in a permanent stain.
Do not dismantle the toner cartridge, as
doing so may cause toner to fly out and
enter your eyes or mouth. If toner gets into
your eyes or mouth, wash them immediately
with cold water and immediately consult a
physician.
If toner escapes from the toner cartridge,
make sure not to ingest the toner or allow it
to directly touch your skin. If toner touches
your skin, wash it away with soap and water.
If your skin still feels irritated after washing it
or you ingest toner, consult a physician
immediately.
When pulling out the waste toner container,
be careful not to let it fall. This may result in
injury.
When replacing the stamp ink cartridge, be
careful that your clothes or skin does not get
stained with ink. If your clothes or skin has
been stained, immediately wash out the
stain with water.
IMPORTANT
Store toner cartridges in a cool location,
away from direct sunlight.
Telephone Equipment
WARNING
When using your telephone equipment, basic
safety precautions should always be followed
to reduce the risk of fire, electric shock and
injury to persons, including the following:
1. Do not use this product near water, for
example, near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet
basement or near swimming pool.
2. Avoid using a telephone during an electrical
storm. There may be remote risk of electric
shock form lightning.
3. Do not use the telephone to report a gas
leak in the vicinity of the leak.
Notice
Product Name
Safety regulations require the product's name to
be registered. In some regions where this product
is sold, the following name(s) in parentheses ( )
may be registered instead.
imagePRESS C165 (F168603)
FCC (Federal Communications Commission)
Users in the U�S�A�
Multi Function Printer, Model F168603
Contains Transmitter Module FCC ID:
AZDFM1M944
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
FCC CAUTION
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
[NOTE]
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules, and
the limits for an ISM equipment, pursuant to
Part 18 of the FCC Rules. These limits are
designed to provide reasonable protection
against harmful interference when the
equipment is operated in a commercial
environment.
This equipment generates, uses, and can
radiate, radio frequency energy and, if not
installed and used in accordance with the
Operator's Manual, may cause harmful

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: