Do not wrap the power cord or tie it in a knot,
as this may result in a fire or electrical shock.
Insert the power plug completely into the AC
power outlet. Failure to do so may result in a
fire or electrical shock.
Remove the power plug completely from the
AC power outlet during a thunder storm.
Failure to do so may result in a fire, electrical
shock, or damage to the machine.
Make sure that the power supply for the
machine is safe, and has a steady voltage.
Keep the power cord away from a heat
source; failure to do this may cause the power
cord coating to melt, resulting in a fire or
Avoid the following situations:
If excessive stress is applied to the connection
part of the power cord, it may damage the
power cord or the wires inside the machine
may disconnect. This could result in a fire.
Connecting and disconnecting the power
Tripping over the power cord.
The power cord is bent near the connection
part, and continuous stress is being applied
to the power outlet or the connection part.
Applying excessive force on the power plug.
Install this machine near the power outlet and
leave sufficient space around the power plug so
that it can be unplugged easily in an
When connecting power
Do not connect the power cord to an
uninterruptible power source. Doing so may
result in malfunction of or damage to the
machine at power failure.
If you plug this machine into an AC power
outlet with multiple sockets, do not use the
remaining sockets to connect other devices.
Do not connect the power cord to the
auxiliary AC power outlet on a computer.
Electrical noise may cause this machine to
malfunction or lose data.
Immediately unplug the power plug from the
AC power outlet and contact an authorized
Canon dealer if the machine makes an
unusual noise, emits an unusual smell, or
emits smoke or excessive heat. Continued use
may result in a fire or electrical shock.
Do not disassemble or modify this machine.
There are high-voltage and high-temperature
components inside the machine. Disassembly
or modification may result in a fire or electrical
Place the machine where children will not
come in contact with the power cord and
other cables or gears and electrical parts
inside the machine. Failure to do so may
result in unexpected accidents.
Do not use flammable sprays near this
machine. If flammable substances come into
contact with electrical parts inside this
machine, it may result in a fire or electrical
When moving this machine, be sure to turn
OFF the power of this machine, and then
unplug the power plug and interface cables.
Failure to do so may damage the power cord
or interface cables, resulting in a fire or
When plugging or unplugging a USB cable
when the power plug is plugged into an AC
power outlet, do not touch the metal part of
the connector, as this may result in an
If you are using a cardiac pacemaker
This machine generates a low level magnetic
flux and ultrasonic waves. If you use a cardiac
pacemaker and feel abnormalities, please move
away from this machine and consult your
Do not place heavy objects on this machine
as they may fall, resulting in injury.
For safety, unplug the power plug if the
machine will not be used for a long period of
Use caution when opening and closing
covers to avoid injury to your hands.
Keep hands and clothing away from the
rollers in the output area. If the rollers catch
your hands or clothing, this may result in
The inside of the machine and the output slot
are very hot during and immediately after
use. Avoid contact with these areas to
prevent burns. Also, printed paper may be
hot immediately after being output, so use
caution when handling it. Failure to do so
may result in burns.
Do not press down hard on the feeder when
using the platen glass to make copies of thick
books. Doing so may damage the platen glass
and result in personal injury.
Close the feeder gently to avoid catching
your hands, as this may result in personal
Be careful not to put your hands or fingers
into the feeder. Otherwise, you may be
Do not place your hands in the part of the
tray where stapling is performed (near the
rollers), especially pay careful attention to the
sharp staples, as this may result in personal
Do not insert your hand into the machine
while the paper drawer is removed, as this
may result in personal injury.
Energy Saver key
(Energy Saver) for safety when the
machine will not be used for a long period of
time, such as overnight. Also, turn OFF the
main power switch, and disconnect the
power cord for safety when the machine will
not be used for an extended period of time,
such as during consecutive holidays.
This product is confirmed as a Class 1 laser
product in IEC60825-1:2014 and EN60825-1:2014.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL À LASER DE CLASSE 1
APPARECCHIO LASER DI CLASSE 1
PRODUCTO LÁSER DE CLASE 1
APARELHO A LASER DE CLASSE 1
LUOKAN 1 LASER-TUOTE
LASERPRODUKT KLASS 1
The laser beam can be harmful to human
bodies. Since radiation emitted inside the
product is completely confined within
protective housings and external covers, the
laser beam cannot escape from the machine
during any phase of user operation. Read the
following remarks and instructions for safety.
Never open covers other than those
instructed in the manuals for this machine.
If the laser beam should escape and enter
your eyes, exposure may cause damage to
Use of controls, adjustments, or performance
of procedures other than those specified in
this manual may result in hazardous radiation
Laser Safety Caution