Table of Contents
Advertisement
E
E-6
be<num>: rx crc error
The driver has received a packet with an incorrect checksum field.
be<num>: rx fifo overflow
Indicates that the device receive FIFO has overflowed. This is most likely due
to the system being under a heavy load.
be<num>: rx framing/alignment error
The driver has received a packet containing a noninteger multiple of eight bits
and there was a CRC error.
be<num>: rx late collision error
A packet collision has occurred after the channel's slot time has elapsed. This
error usually indicates faulty hardware elsewhere on the net.
be<num>: rx pkt buff error
Indicates that the buffer posted to the device was smaller than the actual
packet received. This error is usually symptomatic of trouble in the operating
system or driver.
be<num>: rxmac did not reset
Cannot reset the receiver state machine. This is most likely due to a bad device
be<num>: tx chained packet descriptor error
The DMA engine encounted a packet that it did not own during the
SunFastEthernet Adapter User Guide—November 1994
Advertisement
Table of Contents
