Sun Microsystems SunFastEthernet Adapte User Manual page 38

3
3-10
Follow by entering y. You will then see the following display:
The destination directory for SunFastEthernet is: /export/exec
a sun4/BQE/install/install_bqe 25 blocks
a sun4/BQE/install/deinstall_bqe 8 blocks
a sun4/BQE/usr/bin/be_speed 208 blocks
a sun4/BQE/usr/man/man4/be.4s 17 blocks
a sun4/BQE/usr/man/man4/qe.4s 16 blocks
a sun4/BQE/usr/man/man4/qec.4s 6 blocks
a sun4/BQE/4.1.3/sys/sunif/if_bmac.h 19 blocks
a sun4/BQE/4.1.3/sys/sunif/if_bqe.h 15 blocks
a sun4/BQE/4.1.3/sys/sunif/if_mace.h 17 blocks
a sun4/BQE/4.1.3/sys/sunif/if_qec.h 28 blocks
a sun4/BQE/4.1.3/sys/sun4m/OBJ/if_bqe.o 57 blocks
a sun4/BQE/4.1.3/sys/sun4m/OBJ/if_qec.o 9 blocks
a sun4/BQE/4.1.3_U1/sys/sunif/if_bmac.h 19 blocks
a sun4/BQE/4.1.3_U1/sys/sunif/if_bqe.h 15 blocks
a sun4/BQE/4.1.3_U1/sys/sunif/if_mace.h 17 blocks
a sun4/BQE/4.1.3_U1/sys/sunif/if_qec.h 28 blocks
a sun4/BQE/4.1.3_U1/sys/sun4m/OBJ/if_bqe.o 58 blocks
a sun4/BQE/4.1.3_U1/sys/sun4m/OBJ/if_qec.o 9 blocks
Software successfully extracted.
4.1.3_U1
Note – The install script assumes you have assigned the hostname for the
SunFastEthernet. For example, if you want to call the SunFastEthernet system5,
then system5 should exist in the /etc/hosts file or NIS hosts maps (if you are
running NIS), otherwise the script exits, and you will have to restart cdm
again.
11. The script will then query:
What host name do you wish to use for be0 [Don't Configure]:
Respond by typing the assigned hostname. If there is more than one
hardware device installed the script will then query: What host name do you
wish to use for be1 [Don't Configure]:, and so on until the script has prompted
SunFastEthernet Adapter User Guide—November 1994