Table of Contents
Advertisement
3. Use the cd command and go to the directory containing your particular
architecture.
4. Type the following line to get a listing for the minor device number for
the be0 device:
# ls -l devices/pseudo/clone@0:be
The resultant listing will have the following format:
crw-rw-rw 1 root sys 11,<minor-device number> <date>
/devices/pseudo/clone@0:be
5. For the above example the minor-device-number should be added to the
etc/name_to_major file as follows:
be <minor-device-number>
4.3.2 Diskless Clients
For support of diskless client booting do the following:
1. Go to your clients root partition and use your favorite editor to add an
entry for the be device to your clients name_to_major file as follows:
# cd /export/root/<client name>/etc
2. Edit the name_to_major file by adding an entry for the be device.
If the major device number for the last file entry is "n" then use " n+1" for
the be channel major device number. As shown in the example, if the last
entry is qe 104 then use be 105.
qec 103
qe 104
be 105
Installing SunFastEthernet Software Using Solaris 2.x
4
4-7
Advertisement
Table of Contents
