Table of Contents
Advertisement
error is usually symptomatic of trouble elsewhere in the operating system.
be<num>: map_regs for qec per-channel reg failed
be<num>: map_regs for bmac reg failed
be<num>: map_regs for bmac transceiver reg failed
and
be<num>: mb_nmapalloc for QMD and buffers failed
The driver cannot allocate sufficient address space for resources. These
messages occur when attempting to load the driver. You will be unable to load
the driver until sufficient address space becomes free. Unloading unused
drivers is one way to free up address space.
be<num>: out of tmds - packet dropped
The driver has run out of transmit message descriptors needed to queue a
packet to the device and discarded the packet. This error usually indicates that
the upper protocol layers are generating packets faster than the driver can
transmit them on the Ethernet and is usually selfcorrecting.
be<num>: pkt missed/drop error
The device has dropped an incoming packet because it had no buffer space for
it. This is most likely due to the driver being under a heavy networking load.
Console Messages (Solaris 1.x Only)
E
E-5
Advertisement
Table of Contents
