Adding Sunwbmac Using Pkgadd Command; Table 4-2 Solaris 2.3 Hardware: 5/94 Cd - Sun Microsystems SunFastEthernet Adapte User Manual

automatically installs SUNWbmac. If disk space is a concern, and you choose
to install another cluster, use the pkgadd command to add the SunFastEthernet
driver as described in the following procedure:
Table 4-2
Cluster
Entire Distribution plus OEM Support
Entire Distribution
End User System Support
Core System Support

4.2.3 Adding SUNWbmac Using pkgadd Command

1. Verify that SUNWbmac is not already installed by typing the following at
the prompt:
# pkginfo | grep SUNWbmac
If no information is displayed then it is not installed.
2. Ensure that the Solaris CD is mounted (refer to your software manuals for
detailed information on the use of the CD).
When the CD is started Solaris_2.3 is automatically mounted on the default
path (/cdrom) as shown in the following example:
# cd /cdrom/sol_2_3_hw594_sparc/s0/Solaris_2.3
3. Use the pkgadd command to install the SunFastEthernet driver as follows:
# pkgadd -d 'pwd' SUNWbmac
Installing SunFastEthernet Software Using Solaris 2.x
Solaris 2.3 Hardware: 5/94 CD
Size
298.80 MByte
298.1 MByte
125.37 MByte
59.88 MByte
4
4-3