The Relationship Between Needle And Looper - Siruba 700L Original Instructions Manual

針與勾針之關係
1. 針與上勾針之關係
當上勾針移至最左時，勾針尖端與針中心距
約 4.4 ~ 4.7mm ，雙針時其左針中心與勾
針尖端距約 5.4~5.7mm 。( 圖 35)
2. 針與下勾針之關係
(1) 當下勾針移至最左時，勾針尖端與針中心
距約 3.7~3.9mm( 雙針時以左針為主 )。
( 圖 36)
THE RELATIONSHIP BETWEEN
NEEDLE AND LOOPER
1.The relationship between the needle and the
When the upper looper moves to the leftest
point, the distance from the looper tip to the
middle line of the needle is 4.4 ~ 4.7mm.
For double needles model, the distance from
the looper tip to the middle line of the left
needle is 5.4~5.7mm.(Fig.35)
1~1.3mm
2.The relationship between the needle and the
lower looper.
(1)When the lower looper moves to the leftest
point, the distance between the looper tip
and the middle line of the needle should
be about 3.7~3.9mm. For double needles
model, the distance is from the lower looper
tip to the middle line of the left needle.
( Fig.36)
Introduction
圖 35 / Fig. 35
圖 36 / Fig. 36
P31