Start First Print - Raise3D Pro2 Manual

3D PRINTER MANUAL- RAISE3D PRO2 SERIES

Start First Print

The Pro2/Pro2 Plus units are pre-leveled at
the factory, but we recommend verifying that
the leveling has not changed during shipping.
First, home the X/Y Axis by selecting the
"home" button, then Z axis "home" button. If
the homing procedures complete without
issues, reposition the print head.
Select "10mm" for "Move Steps" and move X
to 50mm, Y to 10mm.
Use the feeler gauge to check the distance
between nozzle and printing platform. The
optimal distance between is 0.2mm.
The best indication of this is feeling only slight
friction when you slide the feeler gauge into
the gap.
- 27-
www.raise3d.com