[Sense:]Frequency:voltage:range:auto - Keysight U3606A Programmer's Reference Manual

[SENSe:]FREQuency:VOLTage:RANGe:AUTO

Syntax
[SENSe:]FREQuency:VOLTage:RANGe:AUTO <mode>
This command disables or enables autoranging for frequency
measurements via the voltage path. Autoranging is convenient because the
instrument automatically selects the range for each measurement based on
the input signal detected.
[SENSe:]FREQuency:VOLTage:RANGe:AUTO?
This query returns a boolean value that represents the frequency
autoranging setting: 0 or 1
Parameter
auto
Remarks
• Autorange thresholds:
• With autoranging enabled, the instrument selects the appropriate range
• Selecting a discrete range (see
• The instrument enables autoranging after a Factory Reset (*RST
U3606A Programmer's Reference
Item Type
Boolean
Down range at: <10% of range
Up range at: >120% of range
based on the input signal detected.
"[SENSe:]FREQuency:VOLTage:RANGe[:UPPer]" on page
autoranging.
command).
[SENSe:]FREQuency:VOLTage:RANGe:AUTO
Range of values
0|1|OFF|ON
SENSe Subsystem
Default value
1
223) will disable
225
9