Power Supply; Verification Of The Power Supply; Verification And Connection Of Power Cable - Keysight Technologies E5080B Installation Manual

Installation

Power Supply

Power Supply
Before turning on the E5080B power, check the following.

Verification of the Power Supply

Confirm that the power supplied to the E5080B meets the following
requirements:
Voltage
Frequency
Maximum power consumption

Verification and Connection of Power Cable

The three-wire power cable attached to the E5080B has one wire serving as a
ground. Using this power cable allows the E5080B to be grounded, thereby
protecting you against electrical shock from the power outlet.
Step 1. Confirm that the power cable is not damaged.
NEVER use a power cable showing any sign of damage. Faulty cables can
cause electrical shock.
Step 2. Use the supplied cable to connect between the power cable receptacle
(Figure 1-2 on page
power outlet with the grounding prong firmly connected in the ground slot.
Use the supplied power cable with grounding wire to securely ground the
E5080B.
For power cord list and options, refer to www.keysight.com/find/powercords.
16
100 to 240 VAC
50/60 Hz
350 W
19) on the rear panel of the E5080B and a three-wire
Keysight E5080B ENA Series RF Network Analyzers
Requirements