Table of Contents
Advertisement
2.2.2
Technical data
2.3
Accessories
Required accessories
Multiplex Trio drain/overflow Visign MT9
24 Bowden cable
25 sleeve
26 adapter
Drainage capacity (at an accumu-
lation height of 300 mm)
Overflow capacity (at an accumu-
lation height of 60 mm)
Inlet capacity (at 0.25 MPa
(2.5 bar))
Diameter of bathtub drain hole
DN (nominal width) outlet pipe
Length of Bowden cable
Length
Height
Dimensions and installation depth
The accessories shown here are not included in the scope
of delivery. If required, it must be purchased separately.
Pipe interrupter
To ensure that no bath water flows back into the potable water installa-
tion, a pipe interrupter must be installed, e.g. the connection set with
concealed pipe interrupter DN 20, model 6161.86. A suitable cover
rosette for the pipe interrupter must be purchased separately.
Product information
0.92 l/s
0.55 l/s or 0.63 l/s
20 l/min
52 mm
40 / 50 mm
725 mm
130–370 mm
180–430 mm
Ä Chapter 3.1.2 „Installation
dimensions" on page 10
8 from 22
Advertisement
Table of Contents
