Table of Contents
Advertisement
3.2.5
Connecting the inlet
Multiplex Trio drain/overflow Visign MT9
Requirements:
A connection set (e. g. the pipe interrupter set) is available.
n
A pipe interrupter is installed in the supply pipeline.
n
n
The overflow and the drain are mounted.
The overflow and the drain are connected.
n
The connection to the wastewater system has been made.
n
INFO! Mounting with the Viega plug connection is described in
the following. Mounting can also be carried out with other con-
necting materials. If necessary, observe the manufacturer's
instructions.
Push the union nut and the clamping ring (parts of the connection
set) onto the water-carrying pipe.
Push the narrow end of the screw fitting (part of the connection set)
into the pipe as far as it will go.
Push the free end of the screw fitting into the connecting piece.
Use the union nut to screw the pipe tight at the connecting piece.
Insert the connecting piece into the overflow unit.
The connecting piece must click into place in the overflow unit with
a noticeable clicking sound.
Handling
17 from 22
Advertisement
Table of Contents
