Important Safety Instructions - IDTECK SR10 User Manual

IDTeck – SR10 / 20 SMART CARD PROXIMITY READER

1. Important Safety Instructions

When using NESS - IDTECK SR10/SR20 Philips Mifare™ Compatible Proximity Reader, basic safety precautions should
always be followed to reduce the risk of fire, electrical shock, and injury to persons. In addition, the following should also
be followed:
1. Read and understand all instructions of the User's Manual.
2. Follow all warnings and instructions marked on the product.
3. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
If necessary, use mild soap.
4. Do not use this product near water, such as bath-tub, wash bowl,
kitchen sink, laundry tub, in a wet basement or swimming pool.
5. This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supplied to your installation site, consult your dealer or local power
company.
6. Never push objects of any kind into this product or through the cabinet
slots as they may touch voltage points or short out parts that could
result in fire or electric shock. Never spill liquid of any kind on the
product.
7. To reduce the risk of electric shock, do not disassemble this product by
yourself. Take it to qualified service whenever service or repair is required.
8. Unplug this product from the Direct Current (DC) power source and
refer to qualified service personnel under these conditions:
The power supply cord or plug is damaged or frayed.
Liquid has been spilled on the product.
The product does not operate normally after following the operating instructions in this manual.
The product exhibits a distinct change in performance.