Operation - Weinmann JOYCE SilkGel vented Instructions For Use Manual

Operation

4 Operation
All the figures can be found on the enclosed folding sheet.
4.1 Put on/remove mask
1. Undo the bottom headgear clips on the mask.
2. Pull headgear 1 over your head and place the mask on the face.
3. Do up headgear clips 12.
4. If the breathing tube is to be routed over the head: attach the
tube to the headgear using tube anchoring strap 14 (Figure I).
5. Remove mask in reverse sequence.
4.2 Dismantle/assemble mask
1. Undo the headgear clips to remove headgear 1.
2. If necessary: remove the plug for pressure measurement
connections 5.
3. Keep the bottom tabs of coarse adjustment 4 depressed and
remove the forehead support (Figure E).
4. Keep the top tabs of coarse adjustment 4 depressed and
remove fine adjustment 3 (Figure E).
5. Remove forehead cushion 2 from fine adjustment 3 (Figure E).
6. Take mask cushion 13 off mask body 11 (Figure D).
7. Turn retaining ring 7 counterclockwise and remove it
(Figure D).
8. Take off elbow 8 through retaining ring 7.
9. Take rotating sleeve 9 off elbow 8.
10. If present: remove emergency exhalation valve 10 from the
elbow (Figure C).
28 EN JOYCE SilkGel