Sharing Content: Patient Camera - Multi Site - Cisco VX Clinical Assistant User Manual

MBTelehealth – VX Clinical Assistant Mobile Cart User Guide
4.6.3 Sharing Content: Laptop – Multi Site
To connect a laptop to the videoconferencing equipment:
1.
Using a VGA/ DVI cable connect the DVI end to the DVI-I into source #3 on the
back of the mobile cart.
2.
Connect the VGA end to the matching port on the laptop and turn the laptop on.
3.
Press and hold the PC button on the remote and select PC as the source.
(Alternately, you can select the Main Menu
and then select PC on the sub menu.)
If you do not see your PC image, do the following: on the laptop keyboard, press
the Function key
simultaneously. A display options menu will appear, select the option to display
on both as shown below.
4.
Use Camera and Source 3 on the remote or the Source Control panel on the cart
to toggle between views.
5.
To display the local presentation full screen press the PC button on the remote
then press the layout button and select the desired display option.
6.
Press the camera softkey to display the other sites again.

4.6.4 Sharing Content: Patient Camera - Multi Site

To connect a camera to the videoconferencing equipment:
1.
Connect the camera to the back of the mobile cart based on the connections
below:
DVI Connector
Source 3
VGA Connector
(Fn) and the appropriate F key (often F5, F8 or F10)
Display options
Do Not Use
button and select Presentation
Page 17 of 21