Temperature Conversion Unit (Address 5); Figure 39 - I/O Parameter Window 2 (Sensor Type) - Honeywell 2MLF-RD4A User Manual

5. Internal Memory Configuration and Functions
5.3. Operation parameters setting area
Address 1 to 4 is used for channels 0 to 3, respectively.
3. Use I/O Parameter window of SoftMaster for more convenient setting of the
sensor type.

Temperature conversion unit (address 5)

1. Temperature-converted value is displayed in °C or °F as specified. The bits 0 to 3
are set to 0 or 1 to specify the temperature conversion unit. The rest of the bits are
ignored.
90 Resistance Temperature Detector 2MLF-RD4A User's Guide
WORD
0 Set the sensor type to Pt100
1 Set the sensor type to JPt100
Figure 39 – I/O Parameter window 2 (sensor type)
Honeywell
Description
R200
September 2010