View Variables In The Program - Honeywell 2MLF-RD4A User Manual

4. Operation Setting and Monitoring
4.6. Automatic registration of Special Module Variables

View variables in the program

Step
1
Sample ladder program in SoftMaster is as shown below.
2
On the View tab, click View variables. Addresses are changed to variables.
3
On the View tab, click Address/Variables to see addresses and variables
simultaneously.
4
On the View tab, click Addresses/Comments to see addresses and
descriptions simultaneously.
66 Resistance Temperature Detector 2MLF-RD4A User's Guide
Action
Honeywell
R200
September 2010