Certification Information; Operating Temperature; Signal Words; Warnings And Cautions - Honeywell MultiPro Manual

Certification Information

UL Class I Division 1 Groups A,B,C,D Temp Code T4
UL Class II, Division 1 Groups E,F,G
UL Class III
CSA Class I, Division 1, Groups A,B,C,D Temp Code T4
(Per CSA C22.2 No. 152, only the combustible gas detection portion of this instrument
has been assessed for performance)
ATEX Certification:
II 2 G Ex ia d IIC T4
UL International DEMKO A/S 05 ATEX 0424116X
IECEx Certification:
Ex ia d IIC T4
IECEx UL 07.0003X

Operating Temperature

The MultiPro's operating temperature range is printed on the label on
the back of the instrument. Use of Honeywell Analytics Gas Detectors outside of the
instrument's specified operating temperature range may result in inaccurate and
potentially dangerous readings.

Signal Words

The following signal words, as defined by ANSI Z535.4-1998, are used in
the MultiPro Reference Manual.
not avoided, will result in death or serious injury.
avoided, could result in death or serious injury.
indicates a potentially hazardous situation, which if not
avoided, may result in moderate or minor injury.
CAUTION used without the safety alert symbol indicates a potentially
hazardous situation which, if not avoided, may result in property damage.

Warnings and Cautions

1.
designed for the detection of dangerous atmospheric conditions. An alarm
condition indicates the presence of a potentially life-threatening hazard and should
be taken very seriously.
2.
established procedures. The safest course of action is to immediately leave the
affected area, and to return only after further testing determines that the area is
once again safe for entry. Failure to immediately leave the area may result in
serious injury or death.
3.
whenever alkaline batteries are removed from the alkaline battery pack.
Removal of the alkaline batteries from the battery pack in a hazardous area may
impair intrinsic safety.
indicates an imminently hazardous situation which, if
indicates a potentially hazardous situation which, if not
The MultiPro personal, portable gas detector has been
In the event of an alarm condition it is important to follow
The MultiPro must be located in a non-hazardous location
5