Figure 13 - Frequency Averaging Function - Honeywell 2MLF-RD4A User Manual

1. Average frequency setting range = 2 – 64000 [times]
2. Average interval for the channels used can be calculated as below:
Average Interval [ms] = Average frequency x Channels used x 40ms
Movement average
This function adds all the temperature converted values of the specified channel for a
specific number of times and outputs the average of the sum as digital data. However, in
this case the moving average is calculated.
The samples are taken every 40ms and the moving average of these is given as the output
at every scan.
R200 Resistance Temperature Detector 2MLF-RD4A User's Guide
September 2010
Figure 13 – Frequency averaging function
Honeywell
2. Specifications
2.4. RTD module functions
35