Operation Parameter Setting Area (Put/Putp); Table 8 - Operation Parameter Setting Area - Honeywell 2MLF-RD4A User Manual

5. Internal Memory Configuration and Functions
5.1. Internal memory configuration

Operation parameter setting area (PUT/PUTP)

The internal memory is reserved for the 'Operation Parameter' data of the RTD module.
Table below shows the operation parameter setting area of the RTD module.
Address
Hex. Dec.
0H 0 Using Channel Setting
1H 1 Channel 0 Sensor Type Setting
2H 2 Channel 1 Sensor Type Setting
3H 3 Channel 2 Sensor Type Setting
4H 4 Channel 3 Sensor Type Setting
5H 5 Temperature Display Unit Setting
6H 6 Channel 0 Filter Value Setting
7H 7 Channel 1 Filter Value Setting
8H 8 Channel 2 Filter Value Setting
9H 9 Channel 3 Filter Value Setting
AH 10 Channel 0 Averaging Method Setting
BH 11 Channel 1 Averaging Method Setting
CH 12 Channel 2 Averaging Method Setting
DH 13 Channel 3 Averaging Method Setting
EH 14 Channel 0 Average Value Setting
FH 15 Channel 1 Average Value Setting
10H 16 Channel 2 Average Value Setting
11H 17 Channel 3 Average Value Setting
12H 18 Scaling Type Setting
76 Resistance Temperature Detector 2MLF-RD4A User's Guide
Table 8 – Operation parameter setting area
Description
Honeywell
Default R/W
0 R/W
0 R/W
0 R/W
0 R/W
0 R/W
0 R/W
0 R/W
September 2010
Command
Used
PUT/GET
R200