Figure 81 - I/O Parameter Setting Window 3; Figure 82 - Parameters Settings For Rtd Module - Honeywell 2MLF-RD4A User Manual

6. Programming
6.3. Application program
1. Register the applicable module in the slot where the module is installed and specify
the operation parameters that have to be downloaded to the PLC.
2. Select 'FLAG monitor' on the Special Module Monitoring window.
124 Resistance Temperature Detector 2MLF-RD4A User's Guide
Figure 81 – I/O Parameter Setting window 3
Figure 82 – Parameters settings for RTD module
Honeywell
R200
September 2010