Table of Contents
Advertisement
Certification Information
UL Class I, Division 1, Groups A,B,C,D Temp Code T4
UL Class II, Division 1, Groups F,G
UL Class III
CSA Class I Division 1 Groups A,B,C,D Temp Code T4 Exia
ATEX Certification:
II 2 G Ex d ia IIC T4 Gb
DEMKO 12 ATEX 1103746X
IECEx Certification:
Ex d ia IIC T4 Gb
IECEx UL 12.0014X
Signal Words
The following signal words, as defined by ANSI Z535.4-1998, are used in the Honey-
well IQ Force Safe Operation Manual.
not avoided, will result in death or serious injury.
avoided, could result in death or serious injury.
avoided, may result in moderate or minor injury.
CAUTION used without the safety alert symbol indicates a potentially ha-
zardous situation which, if not avoided, may result in property damage.
Operating Temperature
the label on the back of the instrument. Use of the IQ Force outside of its specified op-
erating temperature range may result in inaccurate and potentially dangerous readings.
Warnings and Cautions
1.
been designed for the detection of dangerous atmospheric conditions. An alarm
condition indicates the presence of a potentially life-threatening hazard and should
be taken very seriously.
2.
tablished procedures. The safest course of action is to immediately leave the af-
fected area, and to return only after further testing determines that the area is once
again safe for entry. Failure to immediately leave the area may result in serious in-
jury or death.
3.
other than the appropriate IQ Force pump (54-69-102) supplied with the instrument.
4.
than the appropriate IQ Force charger (54-69-103) supplied with the instrument.
5.
of the hazardous location.
6.
battery is not replaceable by the user. In the event that the battery becomes unusa-
ble, the instrument must be returned to Honeywell and the battery and associated
parts replaced as an assembly.
indicates an imminently hazardous situation which, if
indicates a potentially hazardous situation which, if not
indicates a potentially hazardous situation, which if not
The Honeywell IQ Force's operating temperature range is printed on
The Honeywell IQ Force personal, portable gas detector has
In the event of an alarm condition it is important to follow es-
Do not use the Honeywell IQ Force with any sample draw pump
Do not charge the Honeywell IQ Force with any charger other
To reduce the risk of explosion, recharge the batteries outside
The Honeywell IQ Force contains a Lithium-Ion battery. This
Advertisement
Table of Contents
