How To Use I/O Parameters - Honeywell 2MLF-RD4A User Manual

4. Operation Setting and Monitoring
4.2. Operation parameters setting

How to use I/O parameters?

Perform the following steps to explain about usage of I/O parameters.
Step
1
Run SoftMaster to create a project.
2
On the Project Window, double-click I/O Parameter
The following window appears.
3
On the I/O parameters Setting window, click the slot of the base where
RTD module is installed. Here, RTD module is installed on Base No.0, Slot
No.2.
4
Search for the applicable module to select.
48 Resistance Temperature Detector 2MLF-RD4A User's Guide
Action
Honeywell
R200
September 2010